Services
CAD Layout
With our design and layout team’s combine experienced of more than 30 years, we guarantee the PCB layout to be 100% faithful to the schematic or we will replace the PCB for free after the correction.
PCB LAYOUT RATES
Minimum Charge of USD160 (for 8 man hours of design services)
Hourly Rate : USD 20
WE PERFORM ALL PCB CAD LAYOUT IN EAGLE CADSOFT. JOB SCOPE INVOLVED
- Redraw schematics in Eagle (if schematics are not provided in Eagle)
- Recheck the provided schematics in Eagle to ensure signal connectivity
- Cross check components used against manufacturer package specifications
- Custom Built Part Library if necessary
- Board CAD Layout based on customer specified dimensions and specific arrangements
- Final Gerbers will be provided upon completion of CAD layout
LAYOUT PROCESS
- We will review schematics and provide you with a quote.
- Establish board design specifications (size, specific parts placement, etc..)
- Board layout in pdf will be sent to you for approval
- If required, modifications will be made to current design and a new board layout in pdf will be sent to you for approval
- Once design approved, a set of pcb gerbers will be provided to you for your manufacturing needs
ORDER
Kindly email us at sales@silvtronics.com for enquiry and ordering of CAD Layout Services. Information we require to quote you on CAD layout jobs are :
- Schematic drawing of circuit. We accept schematics in Eagle Cadsoft or in picture format
- Partslist showing all the parts on the schematics and description of parts package. i.e R1 – 0805 resistor, D1 – SOT23 diode
- Special instructions such as board size, preferred component placement location, high current traces
- If required, modifications will be made to current design and a new board layout in pdf will be sent to you for approval
- Datasheet or diagram for non standard or customized parts. i.e heatsink.
